Usage of Fire Extinguishers Fire Extinguisher Singapore
S queeze the handle: once you are aiming at the base of the fire, squeeze the handle of the fire extinguisher to discharge the extinguishing media. A word of caution: if you are using a CO2 extinguisher, avoid touching the discharge nozzle, as there is risk of getting frost-bite. S weep: sweep from side to side over the base of the fire as you.
Fire Extinguisher Symbols, Class, PASS and More
You want to hit the fuel. Squeeze the top handle or lever. This depresses a button that releases the pressurized extinguishing agent in the extinguisher. until the fire is completely out. Start using the extinguisher from a safe distance away, then move forward. Once the fire is out, keep an eye on the area in case it re-ignites.
How To Use A Fire Extinguisher Pass Labeled Instruction Vector Illustration Safety Manual
The PASS acronym stands for Pull, Aim, Squeeze, and Sweep. This abbreviation is a useful way to remember the steps for using a fire extinguisher safely in an emergency. PASS Fire Acronym for Extinguishers P: Pull the Pin. Pull the pin out from the handle on top of the extinguisher to release the locking mechanism and allow the extinguisher to.
How to use fire extinguishers P.A.S.S Warehouse and Logistic System
A im. Stand at a safe distance from the fire and aim the nozzle of the extinguisher at the base of the fire. S queeze. Squeeze the handles to release the fire extinguishing agent. To stop, release handles. Make sure you are at a safe distance before releasing the handles as the fire could flare up again. S weep.
كيفية استخدام طفايات الحرائق مدونة السلامة
RACE and PASS stand for two ways to use a fire extinguisher. The RACE acronym differs from the word PASS but has the same intention of keeping people safe while reducing damage and is particularly popular in hospital settings. R: Remove or rescue everyone from the area.
What Does PASS Stand For? Guidance on Fire Extinguisher Use
The PASS Technique for Using a Fire Extinguisher* To put the pressurized contents of a fire extinguisher to use, follow this four-step process: PULL the pin: The handle on top of the canister should have a pin going through it to prevent accidental discharge. Remove this pin. Some fire extinguishers have a lock latch or puncture level instead.
How to Use a Fire Extinguisher PASS System for Fire Extinguishers
Understanding the PASS Technique. P ull: The first step involves pulling the pin at the top of the extinguisher. This pin prevents the extinguisher from accidentally discharging. Pulling it out will break the tamper seal and ready the extinguisher for use. A im: Aim the nozzle or hose at the base of the fire, not the flames.
Fire Safety Signs; what do they mean? Total Safe UK
The PASS System. In an emergency, using a fire extinguisher can be frightening, especially if you're unfamiliar with the process. There is an acronym, P.A.S.S., to help you remember the four simple steps: Pull, Aim, Squeeze, and Sweep. Let's break it down now:
What Does PASS Stand For? Guidance on Fire Extinguisher Use
P - Pull the pin: First, you must remove the safety pin to start using the fire extinguisher. This pin is typically located at the top of the extinguisher and is secured by a plastic or metal seal. Pulling the pin will release the locking mechanism, allowing you to use the fire extinguisher.
PASS fire extinguisher All Protect Systems Inc.
To help, they created the 'PASS' acronym, which stands for the following 4 steps: Pull - pull the safety pin/tag out of the extinguisher, priming it for use. Aim - always aim at the base of the fire. To break the fire triangle, you need to aim at the source of the fire where the fuel is, not at the flames. Squeeze - squeeze the.
Fire Extinguisher Operating Procedure
When operating a fire extinguisher, remember the word PASS: P ull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism. A im low. Point the extinguisher at the base of the fire. S queeze the lever slowly and evenly. S weep the nozzle from side-to-side. Source: United States Fire Administration.
Fire Extinguisher Pass
What is the PASS fire extinguisher method? PASS stands for Pull, Aim, Squeeze, Sweep, and refers to the correct and safest way to use a fire extinguisher. It acts as a useful device for remembering each step in extinguishing a fire. Below, we discuss each aspect of PASS in more detail.
What Does PASS Mean When Using A Fire Extinguisher
The PASS method is an easy way to remember how to use a fire extinguisher in an emergency. After verifying that you're using the correct extinguisher for the type of fire, follow these steps: 1. Pull. The first thing you need to do is pull out the pin that prevents you from pressing the handle on the fire extinguisher.
Safety Banner safety banner 1043 PASS How to Use a Fire Extinguisher
Squeeze the lever. The third step of PASS is "squeeze.". To release the extinguishing agent, squeeze the levers together with one hand while aiming the hose at the base of the fire with the other. Apply slow and even pressure when you squeeze the levers. [6] To stop the extinguisher, let go of the levers.
How to Use a Fire Extinguisher Infographic
By using the acronym P.A.S.S., you can easily remember how to use your fire extinguisher in the event of a fire. P: Pull the safety pin from the handle. A: Aim the extinguisher nozzle or hose at the base of the fire. (not directly at the flames) S: Squeeze the handle slowly to discharge the agent. S: Sweep from side to side, while maintaining a.
How To Use A Fire Extinguisher Pass Labeled Instruction Vector Illustration Safety Manual
First, assess the fire; if it is too big or uncontrollable don't risk your safety by trying to put it out, evacuate the house and call 9-1-1 immediately. If the fire is small enough and can easily be put out and contained, continue to use the P.A.S.S. fire extinguisher technique. Make sure to hold the fire extinguisher with the nozzle.